Start Trockner Wie oft sollte die Trocknerentlüftung gereinigt werden?

Wie oft sollte die Trocknerentlüftung gereinigt werden?

0
Wie oft sollte die Trocknerentlüftung gereinigt werden?

OFFENLEGUNG: Dieser Beitrag kann Affiliate-Links enthalten, d. h. wenn Sie auf die Links klicken und einen Kauf tätigen, erhalten wir eine Provision ohne zusätzliche Kosten für Sie

Your clothes dryer is a fantastic appliance that makes doing laundry easier and more convenient than ever.

Let’s talk about how you can maintain your dryer vent system and the dryer lint trap to achieve optimum energy efficiency, appliance longevity, and keep your home safe.

How often to clean dryer vent? The best practice is to clean your dryer vent system at least once a year and some experts recommend twice. If you have a large family or use your dryer a lot for any other reasons, you will want to clean it more frequently.

WHAT’S CLOGGING MY DRYER VENT SYSTEM?

The simple answer is: LINT. Every time you wash a load of clothes, tiny fibers are removed from the edges of your clothing.

These fibers stick to your wet garments when you transfer them into your dryer.

The hot blowing air in your dryer removes them from your tumbling clothes by the thousands and they accumulate in your dryer and in its vent system.

WHY IS CLOGGING A PROBLEM?

A lot of lint is captured in your dryer’s lint trap and much more can accumulate in your dryer’s lint trap housing, inside the dryer duct, inside the dryer vent, and even inside the dryer itself.

Your dryer does its job by expelling hot, moist air, so the lint can bunch up and clog when it’s moist and then dry out.

Connect With Appliance Repair Tech Now

Dishwashers, washer/dryers, ovens, refrigerators, freezers

Help with starting issues, blinking error lights, hot water heaters & more

Get Help

  • A clogged dryer vent system is a fire hazard because lint is flammable and your dryer blows hot air through the vent system. According to FEMA, there are about 2,900 home dryer fires every year, resulting in 5 deaths, 100 injuries, and $35,000,000 in property damage. The leading cause of these fires – more than 1/3 – is the homeowner’s failure to clean their dryer on a regular basis.
  • A clogged dryer vent system increases your energy costs. Your dryer’s efficiency depends on fluidly blowing hot air out of your dryer through the vent system. If your dryer vent system is obstructed by accumulated lint, it takes longer for your load to dry and so it takes more energy to run the dryer longer and push out the hot air.

HOW DO I KNOW IF MY DRYER VENT NEEDS CLEANING?

You don’t have to be an appliance expert to know when your dryer vent system could use a good cleaning.

Here are four simple indicators that it’s time to clean your dryer vent system:

  • It’s been a year since the last time you cleaned it
  • You see that there’s a lot of lint accumulated behind the dryer, which tells you that all the lint isn’t able to get into and then through the vent system and is backing up
  • You notice that there are mold and mildew around the dryer or where the vent goes through the laundry room wall, which indicates that the moist air from the dryer is escaping because it can’t flow freely through the vent system
  • Your drying is frequently overheating, which could be because it’s motor is working too hard to push out the hot, moist air and it’s running too long to dry a load

If you observe any of these things, it’s time to take immediate action to save on energy costs, to prevent costly repairs necessitated by having an overworked dryer, and, most importantly, to protect your family and home from a tragic fire.

CAN I CLEAN DRYER VENT MYSELF?

Many homeowners prefer to save money by cleaning their dryer vent system themselves.

It’s a good and relatively simple do-it-yourself project, but you should be aware of some limitations and cautions.

If your dryer vent system is too long, or if it has a lot of bends and twists to it, you may find that cleaning it by yourself is extremely difficult or maybe even impossible. How do you know?

You can get a good idea about the length of your dryer vent system by eyeballing or measuring how far the dryer is from the exterior wall where you find the dryer exhaust port.

If the dryer vent system’s path is short and straight, you can most likely easily do the job yourself.

If the vent path is long or twisty, it’s better to hire a professional.

It’s quick and easy to clean your dryer vent system if your dryer is located next to an exterior wall and the vent system path is short and straight.

In either case, you will approach this project both from outside the house and from inside.

OUTSIDE THE HOUSE

  • Remove the vent system exhaust port cover. This isn’t difficult because it will just snap off and snap back on, or easily screw on and off. Most vent system exhaust ports are located on the side of your house, usually a few feet off the ground. Occasionally an exhaust port will be on the roof, especially if the dryer is located close to the center of the home.
  • You’ll typically find a ball of lint just inside the duct. Reach in and gently remove any lint that’s accumulated. You’ll also want to remove any accumulated lint off the vent exhaust cover. You’ll be surprised by how much lint can accumulate.
  • Run your ShopVac or vacuum into the vent and over the vent cover to suck up any remnants. You can also use a brush if you don’t have a vacuum handy.
  • Reinstall the exhaust port cover by either snapping or screwing it back in place.

INSIDE THE HOUSE

  • Safety First: Make sure that you unplug your electric dryer or turn off the gas if you have a gas dryer.
  • Pull the dryer away from the wall. If you have a gas dryer, turn off the gas before moving the dryer. Be patient in either case, because It’s not unusual to have to go through some contortions to reach everything, but you can do it.
  • Sie sehen einen flexiblen, ziehharmonikaartigen Kanal, der vom Trockner zu einer anderen Entlüftung in der Wand führt. Es wird normalerweise von einer Bandklemme gehalten, die Sie abschrauben, um den Kanal von der Rückseite des Trockners zu lösen. Lösen Sie das andere Ende des flexiblen Rohrs und überprüfen Sie es auf Beschädigungen. Sie müssen normalerweise nicht ersetzt werden, es sei denn, Sie sehen ein Loch oder einen Riss oder Sie bemerken, dass der Kanal gequetscht wurde.
  • Bürsten und saugen Sie Flusen von der Innenseite des flexiblen Kanals. Achten Sie dabei darauf, den flexiblen Kanal nicht zu durchstechen oder zu zerreißen.
  • Bürsten und saugen Sie die Flusen vom soliden Entlüftungssystem, das durch die Wand zur Auslassöffnung des Entlüftungssystems verläuft.
  • Schließen Sie den flexiblen Kanal wieder an der Rückseite des Trockners und am massiven Kanal an.
  • Bewegen Sie den Trockner zurück in seine ursprüngliche Position. Sie können einen elektrischen Trockner anschließen, bevor Sie ihn wieder an die Wand schieben, wenn Sie möchten, da er oft einfacher zu erreichen ist. Wenn Sie einen Gastrockner haben, schieben Sie ihn an seinen Platz, bevor Sie das Gas wieder einschalten.

Reinigungskits für Trocknerabzüge variieren im Preis je nach Ausstattung und Qualität. Sie können damit rechnen, in den meisten Geschäften zwischen 10 und 35 US-Dollar auszugeben.

Sie können wahrscheinlich mit den einfachsten und günstigsten Kits davonkommen, wenn Sie ein kurzes, gerades Trockner-Entlüftungssystem haben.

Möglicherweise müssen Sie mehr ausgeben, wenn Ihr Trocknerentlüftungssystem länger ist und Sie gründlicher arbeiten möchten.

Kits enthalten normalerweise eine Reihe dünner, flexibler Stangen, an denen Sie eine Bürste befestigen.

Sie drehen die Stange vorsichtig, während Sie die Bürste im Inneren des Kanals bewegen, um Flusenablagerungen zu lösen, damit Ihr Staubsauger sie aufsaugen kann.

Teurere Kits enthalten praktische Zubehörteile wie Werkzeuge zum Aufbrechen von Verstopfungen und Schablonen zum Halten Ihrer Stangen und Vakuumschläuche an der Mündung des Kanals.

WANN IST ES ZEIT, EINEN PROFI ZU RUFEN?

Wenn Sie kein Heimwerker sind oder Ihr Trocknerabluftsystem lang ist oder viele Biegungen aufweist, sollten Sie es besser professionell reinigen lassen.

WIE VIEL KOSTET DIE REINIGUNG IHRES TROCKNERVENTILS?

Ihre Kosten hängen von Ihrem Wohnort und der Art und dem Zustand Ihres Trockner-Entlüftungssystems ab, aber die meisten HLK-Unternehmen oder Kanalreinigungsspezialisten berechnen nur 90 US-Dollar für die Reinigung eines Trockner-Entlüftungssystems.

WIE OFT SOLLTEN SIE IHREN TROCKNER FUSSELFALL REINIGEN?

Ihr Flusensieb ist ein wichtiger Teil Ihres Trockner-Entlüftungssystems und sollte jedes Mal gereinigt werden, wenn Sie eine Ladung Kleidung trocknen.

VERSTOPFEN TROCKNERBLÄTTER FUSSELFALLE?

Die Rückstände von Trocknertüchern können Ihr Flusensieb beschichten. So reinigen Sie es:

  • Rollen Sie die Fusseln mit den Fingern ab.
  • Befeuchten Sie den Bildschirm mit warmem Wasser
  • Verwenden Sie eine Nylonbürste, um den Bildschirm vorsichtig mit Spülmittel und Wasser zu schrubben
  • Spülen, trocken tupfen und wieder einsetzen

FAZIT

Ein sauberes Trockner-Entlüftungssystem ist für einen reibungslosen und effizienten Betrieb Ihres Trockners unerlässlich. Es sollte alle 6-12 Monate gereinigt werden.

Sie können es selbst tun oder einen Fachmann beauftragen. Sie sollten Ihr Flusensieb jedes Mal reinigen, wenn Sie Ihren Trockner benutzen.

Die mobile Version verlassen