Home Afwasmachine Hoe de E1-foutcode op de LG-vaatwasser te repareren?

Hoe de E1-foutcode op de LG-vaatwasser te repareren?

Hoe de E1-foutcode op de LG-vaatwasser te repareren?

BEKENDMAKING: dit bericht kan gelieerde links bevatten, wat betekent dat wanneer u op de links klikt en een aankoop doet, we een commissie ontvangen zonder extra kosten voor u

De LG vaatwasser foutcode e1 is een indicatie dat de draaiende pomp tijdens het gebruik niet genoeg tegendruk krijgt van de vaatwasser.

Of voor sommige LG-vaatwassermodellen betekent de E1-foutcode dat er water lekt in de afvoerbak van de vaatwasser. En een overstromingssensor is geactiveerd.

Along with that, you will have a drain pump runs constantly.

A drain hose leak is the most likely cause of this error. Some solutions are detailed here.

Reasons for the LG dishwasher error code E1

Several issues can be causing this error code on your dishwasher. Some of the common reasons behind the code are

  • The dishwasher wasn’t properly installed
  • Too much detergent or the wrong detergent is overloading the dispenser unit
  • Dishes aren’t properly placed in the dishwasher during a wash cycle
  • There’s a leak in the drain pan
  • The float motor is bad
  • There’s a leak in the sump assembly or the sump motor is bad

Solutions to Eliminate the LG Dishwasher Error Code E1

You can attempt a few different steps in attempting to get rid of the error code on your dishwasher.

Installing the Drain Hose Properly

If the drain hose is positioned below the base this might cause the hose to drain too early.

In turn, you’ll get the LG dishwasher error code e1. To prevent this


Connect With Appliance Repair Tech Now

Dishwashers, washer/dryers, ovens, refrigerators, freezers

Help with starting issues, blinking error lights, hot water heaters & more

Lees ook  5 meest voorkomende whirlpool vaatwasserproblemen

Get Help

  • Make sure the end of the hose is located a minimum of 10 inches (12 inches or more if possible) from the base
  • This prevents premature siphoning flow from the water to the tub in the dishwasher while it’s operating

If there is enough distance between the base and hose, check the drain hose itself.

Check for kinks, possible damage, breaks, or leaks.

If there is damage, you’ll have to replace the drain hose to resolve the errors you’ve been receiving.

Check Door and Drain Pan For Leaks

You’ll want to perform this check while the dishwasher is operating.

Check the perimeters of the door for any droplets of water or leaks.

Even a small leak might be causing the error code to pop up on your LG dishwasher.

Check the door seal for damage. This will have to be done while the machine is off.

Check to make sure the rubber seal isn’t broken or there aren’t any gaps between the surfaces.

Even the slightest spacing issue or gap can cause a leak through the doors while the dishwasher is operating.

If there is damage to the door seal, you’ll have to replace it in order to stop the leaking from the dishwasher door.

Loading Dishes Properly

This might seem like something obvious, but many owners don’t properly align plates and larger objects in the dishwasher.

Not only can this cause the LG dishwasher error code e1, but can also prompt other errors you’ve seen if you own an LG.

Lees ook  Waarom droogt de vaatwasser geen vaat?

Check the dishwasher after loading.

  • Look for large pots or pans which can get in the way of the spinning arms while operating
  • Plaats grote voorwerpen rond de omtrek, omdat dit de waterstraal en de stroomrichting kan beïnvloeden; als de positie rond het bad niet correct is, kan dit leiden tot overmatige waterophoping
  • Zorg ervoor dat grote voorwerpen (containers, schalen, enz.) geen water bevatten terwijl de vaatwasser in werking is

Raadpleeg uw gebruikershandleiding, daar deze u zal laten zien hoe u het gewicht correct kunt verdelen en waar u grotere items in de vaatwasser kunt plaatsen tijdens een runcyclus.

Wasmiddel controleren (het juiste wasmiddel en de juiste hoeveelheden gebruiken)

If you’re using the wrong detergent, or too much/little, this can also cause the LG dishwasher error code e1 to appear.

Using the wrong detergent can produce too much suds, which will clog motor and dishwasher assembly lines.

Only use detergents specified in your user manual. Excess suds will prevent the dishwasher from cleaning your plates properly as well.

Check to ensure your detergent is intended for automatic dishwashers.

Depending on the level of suds, this can immediately prompt the e1 code the moment the spin cycle begins in your dishwasher.

Sump Motor, Sump Assembly, and the Float Sensor

If you’ve exhausted all of these alternatives, check the sump pump, float sensor, and sump assemblies.

If there is damage, leaks, or other faulty parts, they need to be replaced. In most cases, to fix these issues, your best alternative is to contact an LG licensed repair technician for the job.

Lees ook  Waarom zijn vaatwassercycli zo lang?

Especially if you are unfamiliar with repairs, replacing parts, disconnecting water lines, and plumbing lines.

You can get drain pump here