Home Come Ecco perché il frigorifero continua a far scattare CFGI

Ecco perché il frigorifero continua a far scattare CFGI

0
Ecco perché il frigorifero continua a far scattare CFGI

INFORMATIVA: questo post può contenere link di affiliazione, il che significa che quando fai clic sui link ed effettui un acquisto, riceviamo una commissione senza costi aggiuntivi per te

A meno che non lo prendi subito, il frigorifero che fa scattare un GFCI può causare molti problemi.

Non solo il tuo cibo andrà a male se non viene preso in tempo, ma continuerà a succedere se non scopri perché sta inciampando in primo luogo.

Ci sono diversi motivi per cui questo potrebbe accadere.

Oggi discuteremo dei motivi comuni e di come risolvere i problemi.

Cos’è un GFCI e perché vengono utilizzati?

Una presa GFCI, o interruttore di guasto a terra, viene utilizzata nelle aree della casa soggette ad acqua.

For example, you’ll commonly find them in bathrooms and garages.

This type of outlet exists to protect people from electrical shock, and should not be confused with a house fuse or breaker.

A fuse or breaker is to protect your home from an electrical fire.

Connect With Appliance Repair Tech Now

Dishwashers, washer/dryers, ovens, refrigerators, freezers

Help with starting issues, blinking error lights, hot water heaters & more

Get Help

So, if the hot wire accidentally touches a neutral wire there will be an increased amount of current through the circuit and eventually the fuse will blow before a fire starts.

Unlike the fuse, the GFCI is built-in to the outlet itself.

When an appliance is plugged into these outlets, the amount of power going through the device is monitored.

Let’s say a hair dryer is accidentally dropped into a sink of water, the GFCI will detect the interruption in current and cut all power off, possibly saving a life.

Why Refrigerator Keeps Tripping GFCI

When a refrigerator is plugged into a GFCI there are a few reasons it may keep tripping the outlet.

Nuisance Tripping

Most refrigerators with vapor compression have what are called inductive loads.

When an inductive load is switched off, it can produce electromagnetic interference (EMI).

The interference can, and often will, trip a GFCI outlet.

There are deceives known as snubbers that can be installed to eliminate, or at least reduce the effects of the interference.

If you choose to go this way, the snubber will need to be installed between the GFCI deceive and the refrigerator.

If you want to keep the fridge on a GFCI outlet, you can try replacing the breaker in the box with a GFCI breaker.

Also, if you’re dealing with a dedicated circuit that just operates the refrigerator in the kitchen, you can simply remove the GFCI outlet and replace with a standard outlet.

Faults Created by Icemaker or Defrost Heater

Some older model refrigerators aren’t equipped with icemakers or self-defrost functions. However, when they are, the commonly trip GFCI outlets.

Most people with these types of fridges suggest using a non-GFCI outlet.

However, if you have no other choice but to keep the GFCI, it’s best to disable these functions within the fridge.

Ground Fault

A ground fault can be caused by damaged wiring or old appliances allowing electricity to take an unplanned path to the ground.

Such shortcuts can move through conductive items such as metal, which can lead to an electrical shock when you touch them.

When a refrigerator plugged into a GFCI detects this issue, it will trip the GFCI to eliminate a potential hazard.

The important thing to keep in mind that removing the GFCI outlet will only hide the problem, not fix it.

When you notice that the outlet trips every several hours, your refrigerator may have a faulty timed defrost circuit in the freezer.

This is common due to melting ice getting into components.

There is no code-compliant way to fix this issue, other than determining what’s wrong with the fridge and fixing the correct part.

Other Items to Keep in Mind

  • First, it’s important to note that refrigerators in general don’t get along with GCFI outlets. In fact, they’re not required to be attached to one if they are on a dedicated circuit that’s not shared with any other outlets.
  • If your fridge has always been connected to a GFCI outlet and worked, you should begin by replacing the GFCI to see if it simply wore out over time.
  • If the fridge in question is in the garage, remember that most garages don’t have dedicated receptacles or circuits for a fridge. If you need to solve this, it will require rewiring and one or more GFCI outlets.

Perché il frigorifero continua a far scattare l’interruttore

Da circuiti sovraccarichi a una messa a terra impropria, ci sono diversi modi in cui un frigorifero può far scattare gli interruttori.

Prima di esaurire e acquistare un nuovo frigorifero, controlla queste cose.

Sovraccarico

Forse il motivo più comune per un interruttore scattato è un sovraccarico del circuito.

Ciò significa semplicemente che il circuito sta ricevendo una maggiore domanda di elettricità che può effettivamente fornire.

Quando ciò si verifica, dovresti scollegare tutto il resto dal circuito tranne il frigorifero. Questo ti dirà se il frigorifero è il problema.

Se il circuito continua a funzionare solo con il frigorifero collegato, continua a indagare.

Cortocircuito

Si verificherà un cortocircuito quando due fili all’interno di un apparecchio o di una presa si toccano, creando così un’ondata di elettricità che fa scattare l’interruttore.

Se l’interruttore è scattato non appena il frigorifero è stato collegato, scollegare questo apparecchio e provare a collegare qualcos’altro.

Se il secondo apparecchio che hai collegato funziona, probabilmente il cortocircuito è all’interno del frigorifero.

Se non funziona nulla con la presa, molto probabilmente ci sono dei cavi dietro il coperchio della presa che causano il problema.

Ricorda solo che il problema può anche essere all’interno del muro o della scatola dell’interruttore stesso.

Perché il frigorifero fa viaggiare GFCI sul generatore

Più o meno come un frigorifero può far scattare una presa GFCI all’interno della tua casa, può fare lo stesso quando è collegato a un generatore.

Ecco i motivi comuni per cui ciò accade.

Guasto a terra

Se il tuo frigorifero ha una dispersione verso terra, farà scattare ogni volta il GFCI sul tuo generatore.

Per evitare che ciò accada, dovrai individuare la parte difettosa all’interno del frigorifero o del congelatore e sostituirla.

Generatore difettoso

Indipendentemente da quanto sia nuovo il generatore, potrebbe essere difettoso.

Se la tua macchina è ancora in garanzia, è un’ottima idea provare a sostituire quella attuale con una sostitutiva.

Ci sono molte persone che hanno affrontato questo stesso problema e, alla fine, è stato il generatore stesso.

Perdita elettrica

Quando la presa GFCI rileva “perdite” elettriche, in cui la corrente fuoriesce dal dispositivo e prende un percorso diverso verso terra, fa scattare la presa.

Le perdite sono comunemente causate da polvere, apparecchi elettrici difettosi, acqua o isolamento usurato.

Problema di legame o ponticello di terra

La maggior parte dei generatori sono realizzati con un ponticello di terra neutro.

Se stai collegando il generatore a casa tua, questo ponticello di terra dovrà essere rimosso per evitare fastidiosi inciampi.

Poiché la tua casa è già collegata in modo neutro a terra, il filo non è necessario.

Tuttavia, se dovessi scollegare l’unità dalla casa e utilizzarla per altri scopi, dovrai ricollegare il ponticello di terra.

Hai mai avuto a che fare con frigoriferi che fanno scattare GFCI o interruttori prima?

Qual era il problema e come lo hai risolto? Ci piacerebbe sentire i tuoi pensieri, commenta ora e facci sapere.

Exit mobile version