Home Sütő Miért világít a gázsütő gyújtója, de nincs lángja?

Miért világít a gázsütő gyújtója, de nincs lángja?

0
Miért világít a gázsütő gyújtója, de nincs lángja?

KÖZZÉTÉTEL: Ez a bejegyzés partnerlinkeket tartalmazhat, ami azt jelenti, hogy amikor rákattint a linkekre és vásárol, jutalékot kapunk további költségek nélkül

If you attempt to fire up your gas oven and the igniter is glowing but there’s no flame, there are several possible reasons why it isn’t working correctly.

Oftentimes, an oven igniter that worn out and lost efficiency or a faulty gas valve are the reasons why the igniter is glowing but no flame.

Reasons Why Your Gas Oven Igniter Glows but There’s No Flame

Gas Igniter Failed

What is it: The gas igniter is responsible for igniting gas burner and thus heating the oven.

""

A normal operating oven’s igniter will come on and glow bright orange when you set the oven to bake something.

When the igniter is hot enough, the oven’s gas valve will open up and deliver gas through the oven’s burner.

The igniter then lights that gas that’s coming through the oven’s burner. If all is functioning properly, the oven will heat up accordingly.

If the igniter is worn out and lost efficiency, it will not getting hot enough and thus your oven won’t light.

This is usually followed by the smell of gas. If your igniter isn’t working properly, there’s no reason to be alarmed.

"Csatlakozzon

Connect With Appliance Repair Tech Now

Dishwashers, washer/dryers, ovens, refrigerators, freezers

Help with starting issues, blinking error lights, hot water heaters & more

Get Help

The gas valve is equipped with a safety shutoff that turns off the gas in the event that the igniter isn’t functioning properly.

Why it fails: The most common issue associated with a failed igniter is that glowing igniter isn’t drawing enough current to open the gas valve, mostly due to the age of the igniter.

So, even if you see your oven igniter glowing, but it takes much more time to finally ignite burner, there is a big chance that igniter is lost efficiency and needs to be replaced.

Olvassa el  A legfontosabb okok arra, hogy a sütő önmagában kikapcsol

""

Get A New Igniter Here

How to fix: There are a few steps to follow to check the igniter. First, make sure that you turn off the circuit breaker to your oven.

Next, you want to confirm that the power is off by examing the user interface panel, light, and other electrical units. If they aren’t working, you’ll know that the power is off.

Follow this by removing the oven racks, as well as any metal plating on the bottom of your oven. Doing this will give you access to the gas burner and igniter.

Gas Oven Igniter Replacement

Check the igniter for any discoloration. This could be on the element or coil. Basically, anything that looks different from other parts of the igniter. The discoloration is often a dead giveaway that the igniter has failed.

If, however, the igniter looks to be OK, you may turn back on the power and set the oven to heat. Make sure you examine the igniter at the start of its heating cycle.

It should start glowing bright orange in just a few seconds. If it doesn’t and the gas isn’t igniting quickly, turn off the oven so as to halt the ignition function.

This tells you that the igniter is faulty and needs to be replaced.

Gas Valve Malfunctioned

What is it: The gas valve is what ensures gas safely comes through to the oven’s burner.

This happens only when the igniter is hot enough and drawing the proper amount of current.

When the igniter reaches a certain point of heat, gas is delivered to the burner and is properly ignited.

""

Why it fails: The gas valve rarely malfunctions. In fact, it’s often one of the last things to go bad on a gas oven. If there’s an issue, it’s usually related to insufficient voltage.

How to fix: You should hire a qualified professional to perform a live voltage check. This will allow him to determine if the oven’s gas valve is getting the proper electrical continuity. If there isn’t continuity present at the terminals, they may need to use a multimeter to determine if there is a break somewhere in the electrical flow.

Olvassa el  Meddig kell öntisztítani a sütőt?

This is usually between the bi-metal within the gas valve itself. If that’s the case, you’ll know that the valve needs to be replaced with a functioning one.

What Are the Symptoms When Gas Ignitor Failing/ When Its Time to Get a New Ignitor

The oven takes a long time to preheat

What is it: The majority of gas ovens take about 8 to 15 minutes to reach 350 degrees.

Why it fails: A weak igniter could be to blame for why it’s taking so long for your oven to preheat. This can ultimately result in an improper gas flame, as well as high carbon dioxide emissions.

How to fix: Replacing the igniter could resolve your heating issue. To be sure that this is the problem, be sure to refer back to the previous steps to ensure that you are following the proper protocol for checking your igniter.

Előmelegítéskor gázszag jön a sütőből

What is it: It’s normal to smell the faint scent of gas when starting your oven. This is due to the combustion of gas in the oven when it’s ignited.

Why it fails: A faulty igniter can result in you smelling more gas than usual. To ensure that your home is safe from high carbon dioxide emissions, have your igniter checked right away.

How to fix: Oftentimes, replacing the igniter will remedy the strong smell of gas from your oven. Remember, though, you are likely to continue smelling gas every time you light your oven. This is normal. Only when your oven doesn’t get hot should you be concerned.

Mini explosion or “woof sound” when the oven is Preheating

What is it: This happens when the gas improperly builds up in the oven before igniting. The “woof sound” can usually occur about two to five minutes after turning on the oven.

Olvassa el  3 ok, amiért a sütő felbukkant és megbotlott a megszakítóval

Why it fails: Many times, when gas igniter can’t provide enough current to open gas valve in a certain time, gas igniter will open valve slow (when the igniter is new its opens fast) allowing some amount of gas to “leak” through the valve without ignition.

How to fix: Replace igniter with a new one. First, make sure that you turn off the circuit breaker to your oven.

Next, you want to confirm that the power is off by examing the clock, light, and other electrical functions. If they aren’t working, you’ll know that the power is off.

Follow this by removing the oven racks, as well as any metal plating on the bottom of your oven. Doing this will give you access to the gas burner and igniter.

If needed, carefully pull the oven out from its place in order to get access to the back panel.

Remove the back panel and you will see an oven igniter wire connection. Or on some models in order to reach igniter wire connection, you need to remove the bottom drawer (underneath the oven)

""

Conclusion

Always be sure to let a licensed professional take care of any gas parts and valves within your oven. Going so on your own can be dangerous. If it is determined that your gas valve is faulty, it might be more cost-effective to replace the parts rather than having them repaired.

It’s important to examine your igniter the moment it begins giving you trouble. Failure to do so could result in even more problems. With the proper recourse, you can ensure the safety of your oven, and your home.