Αρχική Πως να Όλοι οι κωδικοί σφαλμάτων πλυντηρίου ρούχων Samsung

Όλοι οι κωδικοί σφαλμάτων πλυντηρίου ρούχων Samsung

0
Όλοι οι κωδικοί σφαλμάτων πλυντηρίου ρούχων Samsung

ΑΠΟΚΑΛΥΨΗ: Αυτή η ανάρτηση μπορεί να περιέχει συνδέσμους συνεργατών, που σημαίνει ότι όταν κάνετε κλικ στους συνδέσμους και κάνετε μια αγορά, λαμβάνουμε προμήθεια χωρίς επιπλέον κόστος για εσάς

Σε αυτό το άρθρο, θα δείξουμε πώς να εντοπίσετε τον κωδικό σφάλματος σε ένα πλυντήριο ρούχων Samsung και πώς να τον διορθώσετε.

When SAMSUNG washing machine got a problem, the error code will be displayed on the user interface panel, telling you what part of the washer malfunction and require your attention.

In most cases, this is indicated by two figures on the digital display at the front.

list of error codes for Samsung washing machine.

Samsung Washing Machine Error Codes nd, 5E, SE, 5C, SC, 1 5C.

The washer was unable to drain within 10 minutes.

First of all check your drain filter (at the bottom on the left side) to make sure it’s not clogged.

You might need to drain water from the drum manually first and only then open the drain filter.

If you hear kinda rattling noise coming from the pump, that’s mean drain pump coming to the end, because drain motor impeller coming off from the motor shaft and slipping off.

In this case, only one solution is to change the drain pump.

Connect With Appliance Repair Tech Now

Dishwashers, washer/dryers, ovens, refrigerators, freezers

Help with starting issues, blinking error lights, hot water heaters & more

Get Help

You can get Samsung drain pump here

Need a Part? Click HERE

Samsung Washing Machine Error Codes LO, dS, d5, FL, LO, L0, dE, dE1, dE2, dc, dL, 1 dC, 1dC4, 1dC1

Meaning, door lock unable to lock after several attempts.

In most cases its just the malfunction of the lock.

The control board unable to confirm that the door lock physically locked.

In this case you can’t fix the lock, just replace it.

Samsung Washing Machine Error Codes nF, 4C, 4E, 1 4C

Water not filling up the washer.

There are two common things that could happen.

One of them is faulty water inlet valve, second is water tap being OFF.

You need to remove the top cover on the washer and check water inlet valves for continuity with a multimeter.

Don’t forget to unplug the machine.

If you will get ZERO continuity that means the valve is defective.

Need a Part? Click HERE

Samsung Washing Machine Error Codes 1E, LE, 1C, LC, LC1, 1 1C, 1 LC

Water level sensor failure or water hose connected to the sensor being detached from the drum because of vibration or water hose clogged with some gunk and sensor unable to measure how much water left in the drum.

You need to detached hose from the sensor and just blow into the hose to make sure its not clogged.

If its all ok, then you just need to replace a sensor with a new one.

Need a Part? Click HERE

Samsung Washing Machine Error Codes OE, 0E, OC, 0C, 1 OC, 1 0C

Water overflow issue.

Two common reasons are faulty water inlet valve or defective water level sensor.

If water filling up by a little even with the machine being OFF, thats mean inlet valve not keeping water pressure and not fully closed. Just replace the inlet valve.

The next thing to check is the water level sensor.

Just make sure that hose connected to the sensor properly attached and not being detached from the sensor and from the drum at the bottom.

Κωδικοί σφάλματος πλυντηρίου ρούχων Samsung SUd, 5UD, Sd, 5d, SUdS, 5Ud5Υπερβολικός αφρός στο μηχάνημα .

Συνήθως προκαλείται από τη χρήση λάθος απορρυπαντικού.

Για να εξαλείψετε τον αφρό, απλώς ρίξτε αρκετές κουταλιές μαγειρικό λάδι στον κάδο και λειτουργήστε τη μηχανή στο Quick Cycle with Hot Water.

Κωδικοί σφάλματος πλυντηρίου ρούχων Samsung Ub, U6, Ur, UE, 1 Ub, 1U6 – Μη ισορροπημένο φορτίο.

Αυτό το σφάλμα εμφανίζεται κατά τη διάρκεια του κύκλου στυψίματος, όταν το μηχάνημα δεν μπορεί να κατανείμει το φορτίο μέσα στο τύμπανο.

Έτσι, εάν ακούτε θόρυβο από χτυπήματα κατά τη διάρκεια του στυψίματος ή εάν το μηχάνημα δεν μπορεί να ολοκληρώσει τον κύκλο στυψίματος, θα λάβετε αυτούς τους κωδικούς σφάλματος.

Στο πλυντήριο άνω φορτίου, πρέπει να ελέγξετε την ανάρτηση με 4 μεταλλικές ράβδους για να βεβαιωθείτε ότι οι ράβδοι είναι προσαρτημένες στο πλαίσιο και δεν έχουν σπάσει.

Στο μπροστινό πλυντήριο ρούχων, το πρόβλημα μπορεί να είναι με αμορτισέρ ή ελατήριο ανάρτησης που συγκρατεί το βάρος του τυμπάνου.

Exit mobile version