Home بصلح رمز خطأ Samsung Washer DC – كيفية إصلاحه؟

رمز خطأ Samsung Washer DC – كيفية إصلاحه؟

0
رمز خطأ Samsung Washer DC – كيفية إصلاحه؟

الكشف: قد تحتوي هذه المشاركة على روابط تابعة ، مما يعني أنه عند النقر فوق الروابط وإجراء عملية شراء ، فإننا نتلقى عمولة دون أي تكلفة إضافية عليك

إذا كنت تمتلك غسالة Samsung ، فقد تحصل على خطأ في رمز DC أثناء محاولة تشغيل حمولة من الغسيل. لحسن الحظ ، غالبًا ما يكون خطأ رمز DC حلاً سهلاً!

يشير خطأ رمز DC في غسالة Samsung إلى أن الغسالة غير قادرة على الدوران بسبب عدم توازن الحمل. يعد تصحيح خطأ التيار المستمر أمرًا بسيطًا مثل إعادة توزيع وزن الحمولة الحالية ، أو إزالة العناصر لتقليل الوزن الإجمالي في الغسالة ، أو تغيير قضبان التعليق (أو ممتصات الصدمات).

اقرأ أدناه للحصول على حلول للأسباب الشائعة لخطأ في رمز DC وطرق حل المشكلة.

Balance the Load

Most often, the DC error code can be resolved by redistributing the weight of existing items in the washing machine. Common causes of unbalanced loads are:

  • bulky items such as bedsheets, comforters, and towels
  • jeans, sweaters, and jackets
  • oversized loads
  • undersized loads

If you get a DC code error, check for one of these common causes.

If you have a load of bulky items, try balancing the item around the spin barrel if it is unevenly balled up in one spot.

Similarly, if you have a load of heavy items like towels, try moving the towels around the barrel in a way that evenly distributes the weight.

Finally, check to make sure large or bulky items aren’t tangled around the spin barrel — this could cause the spin barrel to get stuck, resulting in a DC code.

Connect With Appliance Repair Tech Now

Dishwashers, washer/dryers, ovens, refrigerators, freezers

Help with starting issues, blinking error lights, hot water heaters & more

Get Help

If you have a load of heavy items such as jeans, sweaters, or jackets, try redistributing their weight around the spin barrel.

If that doesn’t work, try removing a few items. It might be the case that the weight of the items is too great to allow the motor to spin the center barrel.

If you’re washing a typical load of clothes that don’t have bulky or heavy items, try making sure the load is not too large for the machine.

Although Samsung washers have high volume capacities, it’s still possible to overload the machine leading to a DC error when the spin barrel can’t rotate.

Finally, if you’re washing a single item (or a few very small items), the force of the spinning motion might ball the items up into one location in the barrel.

If that happens, a DC code error might result, as the washer detects an uneven load balance. Try adding a towel to balance the load.

Level the Washing Machine

If weight redistribution doesn’t correct the DC error code, it might be the case that the washing machine itself is not level.

If this happens, the mechanism that detects the leveling of the machine might trigger a warning.

Check to make sure the washer is on a flat, level surface. If you have a leveling tool, use the tool to check the surface of the washer to make sure it’s showing that it is level in all directions.

If you don’t have a leveling tool, try using a glass of water or a measuring cup with lines to see if the water sits level on top of the machine.

If you’re still not sure whether or not your washing machine is level, try manually rocking the washer slightly — if it rocks, then a spin cycle will likely result in a DC code error.

If your surface is not perfectly even, try shifting the position of the machine to a more level position.

If that doesn’t work, assess whether or not your space allows you to change the location of your washer.

If you are unable to move your washing machine to a level surface, try adjusting the leveling pegs of the washer itself.

Locate the peg in the corner of the washing machine where your surface is lowest (assuming it’s uneven), and spin the leg counterclockwise to raise it.

If your leveling pegs are already as high as possible, then choose a different peg and spin it clockwise to lower it.

If adjusting the leveling of the machine doesn’t fix the DC error code, it might be the case that your unit is suffering from failing internal components. Luckily there is an easy fix for a common problem!

Check the Suspension Rods

Samsung washers come with drum suspension rods that might experience wear and tear over time.

A common cause of a DC code error is related to faulty or damaged suspension rods. Luckily, this is a low-cost and simple fix!

If you suspect your suspension rods might need replacing, order your parts online either through Samsung or a third party vendor.

The cost of a full set of four suspension rods is less than $100 online and likely costs less than hiring a technician.

Samsung Washer DC error code

When your parts arrive, follow these steps to replace the suspension rods:

  1. Unplug the machine
  2. Detach the control panel secured by two Phillips head screws
  3. افصل طرفي الأسلاك الموجودين
  4. استخدم مفكًا مسطح الرأس (أو أداة مسطحة أخرى) لإلغاء تأمين مشابك التثبيت
  5. ارفع الغطاء واستخدم مشبكًا أو عنصرًا كبيرًا لتثبيته بأمان في مكانه
  6. قم بإزالة قضيب واحد برفعه لمسح الحامل العلوي (لا تحاول إزالة جميع القضبان الأربعة واستبدالها كلها مرة واحدة)
  7. اخفض القضيب حتى يزيل الحامل السفلي
  8. انزع القضيب وضعه جانبًا
  9. استخدم خرقة متجر أو منشفة لمسح الشحوم الزائدة من المكونات الداخلية
  10. ضع طبقة من شحم السيليكون على القضبان الجديدة حيث ستتلامس مع الحوامل الموجودة في الماكينة
  11. اخفض أحد طرفي القضيب في الحامل السفلي
  12. ارفع الطرف المقابل للقضيب في الحامل العلوي
  13. تأكد من تثبيت القضيب في مكانه
  14. كرر لقضبان التعليق الثلاثة المتبقية
  15. قم بفك غطاء الغسالة (أو قم بتحريك الشيء الخاص بك بعيدًا عن الطريق) لخفض الغطاء
  16. أعد توصيل طرفي الأسلاك
  17. استبدل لوحة التحكم وثبتها ببراغي فيليبس الرأسية
  18. قم بتوصيل الغسالة الخاصة بك
  19. اختبر حمولة جديدة من الغسيل

إذا تم حل خطأ رمز DC الخاص بك ، فهذا عمل رائع! إذا استمر ظهور الرمز ، فقد يكون الأمر كذلك أن الإصلاح سيتجاوز مجرد إصلاح DIY.

اتصل بالمتخصص

إذا لم تؤد محاولة إعادة توزيع وزن حمولة الغسيل إلى حل خطأ رمز DC الذي ينتج عن جهازك ، وإذا كنت واثقًا من أن جهازك مستوي ، وإذا حاولت استبدال قضبان التعليق ، فقد تكون المشكلة متعلقة بـ المكونات الداخلية الأخرى لجهازك.

في هذه الحالة ، قد يكون من الأفضل الاتصال بفني الخدمة لإلقاء نظرة على جهازك.

من المحتمل أن يكلف هذا بضع مئات من الدولارات ، لذا تأكد من أنك بحاجة إلى الفني قبل طلب واحد.

إذا كنت ترغب في تأمين فني مفضل من Samsung ، فتفضل بزيارة موقع دعم Samsung على الويب.

تأكد من شرح جهود استكشاف الأخطاء وإصلاحها في كل من إعادة توزيع الوزن والتسوية. تشمل بدائل الأجزاء الشائعة ما يلي:

إذا كان جهازك تحت الضمان ، أو إذا لم تكن متأكدًا مما إذا كان فني الخدمة يمكنه المساعدة ، فيمكنك بدلاً من ذلك الاتصال بشركة Samsung مباشرةً.

Samsung متاحة على مدار 24 ساعة في اليوم سبعة أيام في الأسبوع من خلال منصة الدردشة عبر الإنترنت الخاصة بها.

Exit mobile version